tubular-water-heater
Tubular Water Heater

We are the source factory, specializing in electric heating production:

  • Pay attention to quality
  • Support customization
  • Tubular water heater
  • Tubular water heater
  • Tubular water heater
  • Tubular water heater
  • Tubular water heater
  • Tubular water heater
  • Tubular water heater
  • Tubular water heater

Tubular Water Heater

Main application of tubular water heater works in water but it also can work in other liquids, such as Thermal oil, Chemical , Ethyl alcohol,Olive oil,Sea water,Milk,Juice etc. Sheath material can be Industrial and Food grade. The heating tube is inserted into the liquid directly, and the biggest advantage of this heating method is that it heats the medium directly and has fastest thermal conductivity.

tubular-water-heater

  • Widely application
  • Flexible design, it can be any shape what you need
  • Surface loading range is 1.0w/cm2~12.0w/cm2 (depends on medium)
  • Diameter range of heating rod is 4.0mm~20.0mm
  • Seamless pipe as heating tube sheath
  • Different sheath material for choose, such as SUS304,SUS321,SUS316/316L,SUS310S,Copper, Titanium,Incoloy 800,Incoloy840
  • The flange or thread is completely sealed between the heating pipe and no water leakage
  • Insulation resistance of electric heater ≧200Mohm
  • Heating medium or sheath material
  • Horizontal or vertical install
  • Diameter of heating pipe or Laiyuan can recommend
  • Length of heating pipe or installation space length
  • Input voltage(V)
  • With screw ,flange or other fittings or not
  • Liquid pressure(kg/mpa/bar)
Stainless-steel-pipe

Main raw material details:Stainless steel pipe

All sheath material for liquids what we use is seamless pipe. It has strong mechanical properties and can withstand certain pressure .

MGO powder

MGO powder has three grades as High temperature series, Middle temperature series and low temperature series. Middle temperature and high temperature MGO powder is better choice for water type heating element .

mgo
Cr20Ni80

Example injection molding cartridge heater

Normally we use domestic FeCrAl or Cr20Ni80 wire . In order to match different application, Laiyuan also use KANTHAL or BGH brand resistance wire .

On the way out of the line Connection pin

Diameter of connection pin depends on diameter of heating pipe, but must to ensure that the connection pin size can bear corresponding current .

tubular-water-heater
tubular-water-heater

Leading Cable

Laiyuan also manufacture tubular water heating element with leading cable directly, it will be more easy for connection power . Cable AWG/mm2 depends on current .

FACTORY SUPPLIES ELECTRIC HEATING ELEMENTS DIRECTLY .

Laiyuan manufacture and export Industrial heating element more than 10 years ,we compliance with Export quality standard all the time . Good quality heaters will reduce your repair cost and improve production ability . Laiyuan realize that , so insist to provide you best heating element always . Research and development department duty to solve your problems . Just call +86-15851048592 or email to jane@china-laiyuan.com freely.

Send Your Inquiry Today
Quick Quote
滚动至顶部