Immersion cartridge heater
Immersion cartridge heater is a good choice to heat a variety of liquids such as sea water,pure water, waste oil ,palm oil , corrosive solutions etc in different size tanks,devices and appliances . Immersion cartridge heater is different with tubular type immersion heater, it can work in small tank with big wattage . Thread ,flange, stopper or other fitting can be welded on cartridge heater tightly , they are helpful for installation.Laiyuan can make different standard threads, such as NPT,BSPT,BSPS,UNF,UNC and M series . Material of thread is in SUS304,SUS316,SUS310S,Copper and Titanium .O-Ring gasket in PTFE, Silicone rubber or PVC material can prevent leakage.In order to prevent moisture and other contamination,Laiyuan use epoxy resin glue to seal the end normally .
- Images
- Features

1. Widely work in different liquids
2. Diameter range:4mm~50mm
3.Thread size: depends on diameter
4.Multi type material for choice according to working environments
5.Standard length of leads cable is 300mm

Projects of Immersion Cartridge Heater
- 240V 1P 1000W
- D=15.8mm L=457.2mm
- 1/2”NPT Screw
- Epoxy resin glue for end sealing
- Material:SUS304 A
- 300mm long fiberglass cable
- Application:Water
Projects of Immersion Cartridge Heater
- 380V 3P 500W
- D=12mm L=350mm
- M16*1.0 Screw
- Epoxy resin glue for end sealing
- Material:SUS304 A
- 150mm long fiberglass cable
- Application: Oil


Projects of Immersion Cartridge Heater
- 55VDC 50W
- D=6mm L=60mm
- M10*1.0 Screw
- Epoxy resin glue for end sealing
- Material:SUS316L
- 300mm long fiberglass cable
- Application: Weak acid solution
Main parameters of immersion cartridge heater before quotation :
- Diameter
- Length
- Voltage/Wattage
- Application
- Working temperature
- Length of leads cable














