Key Features
- Materials Selected for Sustained Thermal Exposure
- Cold Ends Designed Around the Connection Area
- Ceramic End Components and High-Temperature Leads
- Protection for Demanding Cable Routes
Product Overview

A heater intended for sustained high-temperature service needs more than a suitable metal sheath. Its resistance wire, insulation, cold end and lead connections must also tolerate the conditions within the equipment. Laiyuan designs each high temperature cartridge heater around this complete thermal environment, including the parts outside the active heating zone.
The purpose of this series is sustained operation at elevated temperatures. Ordinary cartridge heaters are selected around general heating requirements, while high density designs emphasize power per unit of heated surface. For a high temperature cartridge heater, material compatibility and temperature management take priority; a high process temperature does not automatically require a high surface watt density.
Product Customization
For a high temperature cartridge heater inquiry, provide the heated material, installation dimensions and expected operating cycle.
Define the Temperatures Throughout the Assembly
Record expected temperatures at the heated object and, where known, the sheath and termination. Identify the operating atmosphere and heating/cooling cycles on the application brief.
Separate the Heated Zone from the Connection Zone
Specify overall length, effective heated length, permitted cold-end length and cable route on the drawing. Include any end-component or lead-protection preferences.
Match Output to the Installation
For the high temperature cartridge heater electrical design, provide supply voltage, wattage or warm-up requirement, and bore dimensions. Include thermocouple requirements and the external controller input where temperature feedback is needed.
For a quotation, provide diameter or bore dimensions, overall and heated lengths, voltage, wattage or heating objective, heated material, target temperature, operating atmosphere, duty cycle, cold-end space, lead requirements, sensor needs and quantity. Include an installation drawing where available.


High Temperature Application Review at Laiyuan
For an OEM high temperature cartridge heater project, Laiyuan reviews the application brief together with the equipment drawing. Identify missing temperature or atmosphere information as an open engineering item rather than treating a requested maximum temperature as a complete specification.
Before a repeat high temperature cartridge heater order, report changes to the process temperature, duty cycle or installation environment. A previously supplied configuration should be reassessed when service conditions change.
Contact Laiyuan to confirm the CE marking documentation, RoHS compliance information and REACH-related declarations applicable to the selected configuration.
Key Features
A high temperature cartridge heater uses a sheath material selected alongside the resistance wire and magnesium oxide (MgO) insulation. Sheath options include Alloy 600, Incoloy 800, Incoloy 840 and SUS310S stainless steel. Wire options include Cr20Ni80 and grades supplied by BGH or Kanthal, selected according to the operating requirement.
The end connection can limit operation even when the heating zone suits the process. Laiyuan offers typical cold-end lengths of 10–20 mm and custom extended unheated sections, with compacted high-temperature MgO used in the end construction.
Options include 99% alumina ceramic beads and fiberglass-insulated lead assemblies with pure nickel conductors and stated rating options up to 800 °C. Suitability must be confirmed for the insulation, termination and actual temperatures along the cable route; the conductor alone does not establish the complete lead assembly rating.
Metal braid, flexible metal conduit and high-temperature fiberglass sleeving can protect the leads against mechanical damage. These options complement the thermal design of a high temperature cartridge heater; the lead exit and routing are reviewed separately from the active heating zone.


Molds and heated tooling: A high temperature cartridge heater can be evaluated for tooling processes involving sustained elevated temperatures.

Heated blocks and platens: This range can be considered for heated components operating over long production periods.

Industrial OEM assemblies: A high temperature cartridge heater can be assessed for equipment with demanding thermal exposure around both the heater body and external connections.
Technical Specifications
These high temperature cartridge heater options provide a starting point for engineering selection. Final electrical ratings and temperature limits are confirmed for the complete assembly and operating conditions.
| Parameter | Specification / Available Options |
| Sheath diameter | 6–50 mm |
| Overall length | ≥50 mm |
| Sheath materials | Alloy 600, Incoloy 800, Incoloy 840 or SUS310S stainless steel; grade confirmation required |
| Surface watt density | Recommended below 16 W/cm²; selected for the application |
| Voltage and total wattage | Customized to the equipment supply and heating requirement |
| Long-term heated-object temperature | Recommended below 700 °C, subject to design review |
| Cold-end length | Typically 10–20 mm; custom extended lengths available |
| Internal insulation | High-temperature MgO |
| End construction | Compacted high-temperature MgO; optional 99% alumina ceramic beads |
| Lead construction | Fiberglass-insulated leads with pure nickel conductors; stated options up to 800 °C, subject to assembly confirmation |
| Lead length | Standard: 300 mm; custom lengths available |
| Lead protection | Metal braid, flexible metal conduit or high-temperature fiberglass sleeving |
| Mounting options | Flanges, retaining plates, threads or custom structures |
| Temperature sensing | Optional Type K thermocouple |
A high temperature cartridge heater has different temperatures at its wire, sheath, heated object and lead exit. Laiyuan recommends surface watt density below 16 W/cm² and long-term heated-object temperature below 700 °C for this series. Suitable nickel-alloy sheath configurations may be considered at sheath temperatures up to approximately 850 °C, subject to complete design review; this is not a universal assembly rating.







